Banshee Lockout Time Release lockout

Description

Time released lockout for the Banshee.
Our system employs the use of a custom spring attached from the finger to the body. There are two attachment points on the finger and two on the body. This will allow a simple and quick adjustment to the tension of the spring. Move the spring from one location to the next to increase or decrease the tension. More tension = an increase in the amount of time before the finger will apply force on the pressure plate. This will allow more clutch slipping at the start. Decrease the tension and the finger will apply force on the pressure plate sooner providing less clutch slippage at the start.

*Machined out of 7075 aluminum, about 50% stronger than 6061.

*Inter-connected center to further increase strength/ the above two points are very important in this application due to running considerable more weight on the fingers.

*Steel stops added to finger weight location- eliminates fingers from slamming into aluminum body.

*Equipped with big power fingers. These fingers have an additional location for adding a smaller weight. This will allow you to run additional weight or alternate between the two.