Banshee Clutch Cover Polished with clear lens

$382.00$444.95

Polished Banshee Quick change clutch cover with clear lens .

Over 5 years of production with no known failures.

*Lighter than billet aluminium.

*A specific composition of aluminium and additional metals designed specifically for this application.

* All unnecessary vent holes & black rubber plug removed for a clean look.

* If this cover breaks in the kick start area from normal use, we will replace with a new cover.(subject to inspection)

WATER PUMP BEARING MUST BE PRESSED IN STRAIGHT WITH A PRESS. IF NOT, THIS WILL DISTORT BORE. UNLESS THE BEARING IS INSTALLED BY DIRECT DRIVE, WE WILL NOT WARRANTY CLUTCH COVER IN THIS AREA WITH REGARDS TO LOOSE WATER PUMP BEARING. If your brake pedal is interfering with your clutch cover, you can adjust it up or down with the adjuster on the back part of the pedal.

This is a completely new clutch cover not an old style modified factory part.

That used to be the way to go, but not anymore. Direct Drive has now brought to its
valued customers the best banshee clutch cover available.

There are many weak areas with a modified clutch cover. They are less than 1/8th of an
inch thick in the kick start areas making the cover very prone to breakage. Direct Drives
new clutch covers are over 1/2 inch thick in this area in addition to a substantial amount of interior bracing. This adds strength without adding weight.

The different methods that are used to attach a quick change ring to the cover can leave a large window for potential failure. With welding you have the opportunity for cover warpage and if the weld is not done properly the cover may leak. Some tack weld the modification on and fill the left over area with some type of silicone, again another opportunity for failure. Another method is to bond the ring on with an epoxy , this method does not pose any warping problems but if an over the counter epoxy is used, it will not hold up under this type of use and very often will result in failure.

With our new clutch covers all of these potential failures have been eliminated. Our quick change is part of the cover, casted in from the start.

So when purchasing parts from your local dealer demand authentic Direct Drive
products. Demand the best for your hard earned dollar.

Clear
SKU: BCCPOLCLR1 Category:

Description

*Over 5 years of production with no known failures.

*Lighter than billet aluminium.

*A specific composition of aluminium and additional metals designed specifically for this application.

* All unnecessary vent holes & black rubber plug removed for a clean look.

* If this cover breaks in the kick start area from normal use, we will replace with a new cover.(subject to inspection)

WATER PUMP BEARING MUST BE PRESSED IN STRAIGHT WITH A PRESS. IF NOT, THIS WILL DISTORT BORE. UNLESS THE BEARING IS INSTALLED BY DIRECT DRIVE, WE WILL NOT WARRANTY CLUTCH COVER IN THIS AREA WITH REGARDS TO LOOSE WATER PUMP BEARING. If your brake pedal is interfering with your clutch cover, you can adjust it up or down with the adjuster on the back part of the pedal.

This is a completely new clutch cover not an old style modified factory part.

That used to be the way to go, but not anymore. Direct Drive has now brought to its valued customers the best banshee clutch cover available.

There are many weak areas with a modified clutch cover. They are less than 1/8th of an inch thick in the kick start areas making the cover very prone to breakage. Direct Drives new clutch covers are over 1/2 inch thick in this area in addition to a substantial amount of interior bracing. This adds strength without adding weight.

The different methods that are used to attach a quick change ring to the cover can leave a large window for potential failure. With welding you have the opportunity for cover warpage and if the weld is not done properly the cover may leak. Some tack weld the modification on and fill the left over area with some type of silicone, again another opportunity for failure. Another method is to bond the ring on with an epoxy , this method does not pose any warping problems but if an over the counter epoxy is used, it will not hold up under this type of use and very often will result in failure.

With our new clutch covers all of these potential failures have been eliminated. Our quick change is part of the cover, casted in from the start.

So when purchasing parts from your local dealer demand authentic Direct Drive products. Demand the best for your hard earned dollar.

Additional information

Weight 5 lbs
Dimensions 14 x 8 x 6 in
Options

Add Lockout with Clutch Cover, Please install Water Pump Bearing & Seal, Please add Clutch Cover Gasket

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.